The Great Goat Adventure - Part 2....The Goat Shed

So....I told you last time about how we installed the fence for the goats.  Well, let me tell you about my finest achievement....the goat shed!!!

My oldest daughter, Brianna, and I decided that we were going to build it inexpensively (well, truth be told, our pocketbook decided that we would build it inexpensively!!), so we read about using old wooden pallets.

Farmer Willie took off for the feed stores, plant stores and tractor supply stores to gather pallets that they were getting rid of.  Finding pallets was actually a bit more difficult than I thought it would be.  It seems that most places recycle their pallets (which is good for the environment, but makes it a bit more difficult if you are looking for free pallets!).

Luckily for me, my dad kept his eyes open and found me some as well!!

Pallets are accumulated....now we move to step two....planning!

Well, when you are building a goat shed with pallets, the first step in planning is to look at what materials you have....check!

Then you move into the sketching it out, planning what you need part.....ummmm, I don't like doing that so we skipped that portion!!!  :)  (drives Farmer Willie C-R-A-Z-Y!!)

Alrighty, so we have a bunch of pallets, screws, nuts and bolts and we set to work!!  For the walls, we lined up two pallets for each side wall, three for the back wall, and bolted them together.

We made three walls like this and then attached the walls to each other at 90* angles using L brackets.

Oops!  Look who snuck into the photos!!  Cutie pie!!

Anyways, back to the shed....after attaching the three walls together, we attached one more pallet in the front for a half wall.  I know that I am not describing it well, so just take a look!!

Why oh why do they have to make a point to take pictures of me when I am not looking my normal, chic self??!!??

Okay, so you see the 1/2 wall in the front with the opening for the door.

Next we attached some wood pieces to the front "beams" to raise the front of the roof a bit in order to assist with drainage.  After that we started to add the roof boards.

Let me tell you, I have always hated the part of building where you have to take exact measurements and then cut these crazy accurate angles in order to make the roof.  Then I discovered the....BRACKET section at Lowe's!!! 

Oh my goodness, I can attach anything to anything and NEVER have to cut an angle!!!!

Anyways, Bri and I used the brackets to attach the roof boards and it looked something like this....

After attaching the vertical roof boards, we came back through and attached some horizontal ones that we could attach the metal roofing material to.

I used some scrap wood that we had for the 2x4's, but I did have to go and purchase the brackets and metal roofing.



Then it was time for the roof to go on!  In my opinion, this was the most difficult part as it was hard to screw through the metal and then into the wood, even though Bri and I used screws that were made for that.  Oh, and if you use metal for roofing, be careful!!  The edges are sharp!!!

 

 So now we have walls and a roof, but you might have noticed that there were large gaps in-between the boards of the pallets.  We wanted some gaps to promote air flow, but not so many that they were not protected from rain.

We were not too worried about cold wind as we live in Texas and we don't have much of that around these parts!!  :)

To cover the gaps, we pulled boards off of extra pallets and attached them to the walls.

 Let me tell you, pulling those boards off of the extra pallets was WAYYYY more difficult than it looked!!  Those pallets are made to stay together!!!

So after we covered the outside of the shed, we were ready for some paint!  Well, at this point all of the girls wanted to be involved!  And, or course, what color should it be but RED!!!

So after a day full of hard work we were dirty...

Had gone a little crazy....

 Were a bit more cautious when picking up wood....

 And totally tuckered out!!!

But we had FUN....



And had a deep sense of satisfaction...

 

When we were able to look at this....

And know that it would keep these girls....

SAFE and having FUN!!

Proverbs 27:23, 26 "Be diligent to know the state of your flocks, And attend to your herds.  The lambs will provide your clothing, and the goats the price of the field."